Preparing the Drying area

Alright! Now that the log is ready, I need to get started on a place to stack and dry. It needs to be straight and flat. If it is not straight, your fresh lumber wont be straight. I just happen to have a cement slab and cinder blocks I can use. I laid the cinder blocks with a 8 inch gap between them and made it 32 inches long. 2 1/2 cinder blocks in each of 6 rows.

 

The big deal here is, your lumber will be as flat as your drying area. The rule of thumb for air drying lumber is 1 year time for every inch of thickness. So you also need to choose a spot that can be occupied for at least a year, most likely longer. It will also need to be protected from the weather in your area.

Next Step, Getting it milled….